메뉴 건너뛰기

본문으로 바로가기 주메뉴로 바로가기
Home  >   시설및장비  >   해저장비

해저장비

세계 해양 분야에서 kt submarine은 기술력을 인정받고 있습니다.

Q1000 ROV

Q1000 사진 facilities & equipment
  • - Depth Capability
    5 to 2000m water depth
  • - Dimensions
    Length : 5.50m(tracker stowed)
    Width : 5.50m(over track guides)
    Height : 3.35m(excluding lift point)
  • - Weight in air(estimated)
    Up to 22.0 tonnes(with skids)
    Up to 24.0 tonnes(with tracks)
  • - Subsea Power
    2 x 500hp(375kW), 4 pole, 60Hz motors(Manufacturer-Sytek/SME)
  • - Horizontal Thrusters
    Forward/Reverse : 2 x Curvetech HTE500
    Left/Right : 2 x Curvetech HTE500
    Rear(balance) : 2 x Curvetech HTE500
  • - Vertical Thrusters
    4 x Curvetech HTE500
  • - Thrusters
    Individual isolation, 5 thruster voids per compensator
  • - Maximum bollard pull
    2600kg in free swimming mode(FWD/AFT)
    1300kg in free swimming mode(Lateral)
    600kg additional from track drive
  • - Predicted Performance
    Vertical : Up to 2.0 knots
    FWD/AFT : Up to 3.5 knots
    Lateral : Up to 2.0 knots
  • - Predicted Power
    Minimum of 50kW to any thruster(Approx 900Kgf)
  • - Power
    Two vertically mounted, hydraulically driven water pumps
    Variable speed control from surface 0-300kW per pump
    (0 ~ 350kW in tracked mode)
  • - Pressure
    7-9abr approx. flow 1000m³/hr @8bar per each
  • - Trench depth
    0.0 ~ 3.0m(3m swords included) - continuously variable
    through smart hydraulic cylinder
    0.0 ~ 2.0m(2m swords included) - continuously variable
    through smart hydraulic cylinder
  • - Maximum leg width
    Up to 650mm
  • - Product size standard
    Up to 500mm
  • - Product size upgrade
    Up to 600mm
  • - Manipulators
    2 x Schilling Orion Extended Reach 7 function, position control operation
  • - Cutters
    WCS38D Webtool cutter & Soft Line Cutter
    Intensifier(ready to accept 75mm or 100mm Cutter)
  • - Backfill
    Located at the rear of the vehicle mounted on existing eductor feed flange
  • - Control
    Separate operator control screen
  • - Configuration
    Track modules bolt to chassis(interchangeable with skids)
  • - Track drive
    Hydraulic independent proportional drive to each track
    Track Tension controlled by oil filled piston
  • - Minimum soil strength
    5KPa

Q1000 Brochure 다운로드